5310-12-191-7919

Flat Washer

5310121917919 121917919 24300071305 DIN125-A13-ST50DBL8451.11 DIN125-B13-ST50DBL8451.21 0110 7110 06.15013.6113 06150136113 A13-ST50-A3C 0630 001 049 N 3502 426 5Q (241)A396300118110 0-118110 00118110 8520178 06.15013-6113 0630001049 1712703K1 0630-001-016 DIN125-A13-200HV-A3P A13DIN125-ST50-A3P A13DIN125ST50A3P A13DIN125ST50GALZN8C DIN125-A13-ST50-A3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer