5310-12-191-4988

Flat Washer

5310121914988 121914988 50-6013 006424 502086 0621 4280 18451005 596-022 596.022 38100.120.001 S212414 000125-005308 000125005308 06214280 D00125 003 3 DIN125-A13-140HV A13DIN125-ST A13DIN125ST DIN125-A13-ST 6.0215.01.0.0130 F300 0T 017 9535

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer