5310-12-190-8345
Flat Washer
5310121908345 121908345 2000102612 VDPM00784 0001511152
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-12-190-8345
Request a Quotation from participating marketplace vendors
Restrictions 5310-12-190-8345
End Users 5310-12-190-8345
- Austria (WB)
- Brazil (YA)
- Spain (YB)
- Canada (ZC)
- France (ZF)
- Germany (ZG)
- Republic of Korea (ZH)
- Netherlands (ZN)
- Greece (ZU)
- Turkey (ZW)
Approved Sources 5310-12-190-8345
- Part Number
- Manufacturer
- Status
- 2000102612
- Manufacturer
- D8015 - Robert Bosch Gesellschaft Mit (Active)
- Primary Buy
- Primary Buy
- 2000102612
- F3742 - Robert Bosch France (Active)
- Secondary Buy
- Secondary Buy
- VDPM00784
- F5316 - Giat Industries (Centre De Tarbes) (Active)
- Secondary Buy
- Secondary Buy
- 0001511152
- D8266 - Rolls-Royce Solutions Gmbh (Active)
- Secondary Buy
- Secondary Buy