5310-12-188-2482

Flat Washer

5310121882482 121882482 DIN988-30X42X0,5 PS30X42X0,5 PS30X42X0-5 30X42X0,5DIN988 30X42X0-5DIN988

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-12-188-2482 WASHER,FLAT 5310121882482 121882482

Managed by Germany
NSN Created on 22 Jun 1981
Data Last Changed
January 2023
NATO Update Count
1
NATO Data Quality
5310-12-188-2482 WASHER,FLAT 5310121882482 121882482 1/1
NSN 5310-12-188-2482 (Generic Image) 1/1

5310-12-188-2482 Stock and Availability Marketplace 5310-12-188-2482

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-12-188-2482 RQST NE eBay
eBay Updated Every Day
5310-12-188-2482 RQST eBay
Amazon Updated Every Day
5310-12-188-2482 RQST NE Amazon

5310-12-188-2482 Related Documents Related Documents 5310-12-188-2482 1+ Documents (More...)

5365-34-040-8013 5365340408013 340408013 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.

5310-12-188-2482 Related Items NATO Stock Numbers Related to 5310-12-188-2482