5310-12-179-6783
Flat Washer
5310121796783 121796783 DIN988-32X45X1 000988032004 32X45X1DIN988
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-12-179-6783
Request a Quotation from participating marketplace vendors
Restrictions 5310-12-179-6783
End Users 5310-12-179-6783
- Singapore (YJ)
- Australia (ZA)
- New Zealand (ZE)
- Germany (ZG)
Approved Sources 5310-12-179-6783
- Part Number
- Manufacturer
- Status
- DIN988-32X45X1
- Manufacturer
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Definitive Standard
- Definitive Standard
- 000988032004
- D8046 - Daimler Ag (Replaced)
- Secondary Buy
- Secondary Buy
- 32X45X1DIN988
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete