5310-12-177-0155

Flat Washer

5310121770155 121770155 51917100106 5000498409

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-12-177-0155 WASHER,FLAT 5310121770155 121770155

Managed by Germany
NSN Created on 3 Jan 1979
Data Last Changed
January 2023
NATO Update Count
1
NATO Data Quality
5310-12-177-0155 WASHER,FLAT 5310121770155 121770155 1/1
NSN 5310-12-177-0155 (Generic Image) 1/1

5310-12-177-0155 Stock and Availability Marketplace 5310-12-177-0155

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-12-177-0155 RQST NE eBay
eBay Updated Every Day
5310-12-177-0155 RQST eBay
Amazon Updated Every Day
5310-12-177-0155 RQST NE Amazon

5310-12-177-0155 Related Documents Related Documents 5310-12-177-0155 1+ Documents (More...)

5310-14-568-8998 5310145688998 145688998 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-12-177-0155 Demil Restrictions 5310-12-177-0155

DEMIL: | DEMILI: | CRITICALITY: | HMIC: | PMIC: | EDC: | ADPEC:

5310-12-177-0155 is a Flat Washer

5310-12-177-0155 End Users End Users 5310-12-177-0155

France (ZF)

5310-12-177-0155 Related Items NATO Stock Numbers Related to 5310-12-177-0155