5310-12-176-2845

10 Nov 1982 5975-12-345-7238 Elek Kabel Halter 5240127RNCC: 5 | RNVC: 9 | DAC: 9 20 Apr 1998 5310-12-176-2845

1680-99-614-0402 1680996140402 996140402 BUSH

5307-00-614-0402 5307006140402 006140402

4240-22-614-0402 4240226140402 226140402 is goggles designed for eye protection against industrial hazards, such as impact, dust, splash, fumes, gases, or injurious rays. excludes goggles, flyers'; goggles, sun and goggles having corrective lenses.

5365-01-614-0402 5365016140402 016140402 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.