5310-12-175-8238

Flat Washer

5310121758238 121758238 27-0350706 5310000761 7.312-066.0 7832-071 7832071 9504200610 0017730020 DIN125-B10,5-140HV-A2 B10,5DIN125-A2-70 B10-5DIN125-1-4301 B10-5DIN125A2 DIN125-B10,5-A2-70 10-5DIN125X5CRNI189 10-5DIN125-1-4301 B10-5DIN125X5CRNI189

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer