5310-12-175-8208

Flat Washer

5310121758208 121758208 2522 600 27147 252260027147 5310000894 9504200421 DIN125M6-A2 0017710021 DIN125-B6,4-140HV-A2 9504200404 B6,4DIN125-A2-70 B6-4DIN125-1-4301 B6,4DIN125A2 DIN125-B6,4-A2 DIN125-B6,4-A2-70 B6-4DIN125A2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer