5310-12-175-8207

Flat Washer

5310121758207 121758207 DIN433-6,4-140HV-A2 5310002493 272.329 782 223740 E44080M851AP0S29 6-4DIN433X5CRNI189 DIN433-6,4-A2 6,4DIN433-A2 6-4DIN433A2 6,4DIN433-A2-70 6,4DIN433A2 DIN433-6,4-A2-70 6-4DIN433-1-4301

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer