5310-12-175-7426

Flat Washer

5310121757426 121757426 DIN125-A2 125-2-4.3 5310000672 964501213 273.519 272 G3A20012504 41742 005130172 223008 TA003552 S1/40 0950033 35.01251.500431 272.519 272 7830-063 7830063 114025 9905201 91-003-3607 2522 600 83026 25 100-005 25100-005 7S341080 DIN125-A4,3-140HV-A2 4,3DIN125A2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer