Premium Information is available for this item - Upgrade for $1 a day

5310-12-175-7410

Flat Washer

5310121757410 121757410 964501211 04093 S1/197 25100-004 077154 5310000729 450900-2042-032 150420 DIN125-A3,2-140HV-A2 A3,2DIN125-A2-70 A3,2DIN125A2 3,2DIN125-A2 3-2DIN125A2 A3,2DIN125-A2 A3-2DIN125A2 DIN125-A3,2-A2-70

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

Managed by Germany

NSN Created on 16 Oct 1978

Data Last Changed
November 2023

NATO Update Count
1

NATO Data Quality

5310-12-175-7410 WASHER,FLAT 5310121757410 121757410 1/1 — NSN 5310-12-175-7410 (Generic Image) 1/1

Marketplace 5310-12-175-7410

Need Help?
Request a Quotation from participating marketplace vendors

Subscribe to View Vendor Details...

DIN125A32A2 WASHER,FLAT 1100 EA NS

Updated Every Day

5310-12-175-7410 RQST NE

Related Documents 5310-12-175-7410 5+ Documents (More...)

https//www.nsnlookup.com
/fsg-53/fsc-5310/de

5310-12-128-4705 Flat Washer 5310121284705 121284705

5310-12-128-4705 5310121284705 121284705 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

https//www.nsnlookup.com
/fsg-53/fsc-5310/de

5310-12-132-9835 Flat Washer 5310121329835 121329835

5310-12-132-9835 5310121329835 121329835 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

https//www.nsnlookup.com
/fsg-53/fsc-5310/nl

5310-17-015-9530 Flat Washer 5310170159530 170159530,DIN125

5310-17-015-9530 5310170159530 170159530 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

https//www.nsnlookup.com
/fsg-53/fsc-5310/my

5310-34-030-6763 Flat Washer 5310340306763 340306763

5310-34-030-6763 5310340306763 340306763 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

https//www.nsnlookup.com
/fsg-53/fsc-5310/de

5310-12-136-6063 Flat Washer 5310121366063 121366063

5310-12-136-6063 5310121366063 121366063 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.