5310-12-175-6245

5310-33-125-5892 5310331255892 331255892 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-14-274-3481 5310142743481 142743481 is a bent spring metal washer with a centrally located hole. it is designed to exert pressure axially when assembled in place.

5310-12-125-0060 5310121250060 121250060 is a bent spring metal washer with a centrally located hole. it is designed to exert pressure axially when assembled in place.

5310-12-141-6430 5310121416430 121416430 is a bent spring metal washer with a centrally located hole. it is designed to exert pressure axially when assembled in place.

2990-27-005-0315 2990270050315 270050315 is a housing which supports, aligns, and positions internal parts of a oil pump assembly, engine. it creates a boundary for close clearance of gears, vanes, or pistons to produce pressure or flow of fluids confined to the parameters of the housing.