5310-12-174-7453

Flat Washer

5310121747453 121747453 D125-A84-R865 273.325 134 272.325 134 7832070 2.72-37329/3732 0824711 043121014 N 3502 422 X 1340750 N3502422X 24300690840 SP01803 7832-070 VS0824711 99141041 318409 DIN125-A8,4-140HV-A4 A8,4DIN125-A4-70 D125A84R865 A8,4DIN125-A4 A8-4DIN125A4 00.3.396.0108 DIN125-A8,4-A4-70

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer