5310-12-174-3361

Flat Washer

5310121743361 121743361 DIN988-10X16X1 DIN988-10X16X1,0 (241)A396300120544 00120544 0630 004 037 0630004037 2.72-38126/1731 6151142108 BN 1976 DIA. 10X16 EP. 1 ACIER BN1976-10X16-1MM 91837535 38590.100.016 0630-004-037 2.72-38126-1731 0130345 10X16X1DIN988

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer