5310-12-173-9088

Flat Washer

5310121739088 121739088 D125-A32-M37 D125-A32-M648 D125A32M37 D125A32M648 TFS00-09355MS DIN125-A3,2-CU2-E1E 5N3210-005-21 A3-2DIN125MSE1E A3-2DIN125MSGALNI3BK DIN125-A3,2-CU3-E1E DIN125-A3,2-CUZN-E1E DIN125-A3,2-MS-E1E A3,2DIN125-MS-E1E

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer