5310-12-172-6828

Flat Washer

5310121726828 121726828 426010 C940812 POS 5 C940954 POS 81 N3502430X 01.0455.54 2.72-31560 ITEM 1447 C940900 POS 81 C940948 POS 81 C940949 POS 81 C940950 POS 81 C940951 POS 81 C940953 POS 81 C940958 POS 81 101286 N 3502 430 X D125-A170-R865 395.04.0059 DIN125-A17-140HV-A4 DIN125-A17-A4-70 D125A170R865 A17DIN125-A4 A17DIN125-A4-70 A17DIN125A4

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer