5310-12-169-3560

Flat Washer

5310121693560 121693560 DIN433-15-140HV-A3P 24302171500 0110 7556 06.15030.0317 06150300317 000433015001 000433015002 8104030114 N0115653 01107556ES8923-08 15DIN433-ST-A3P 15DIN433STA3P 15DIN433STGALZN8C DIN433-15-ST-A3P DIN433-15STA3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer