5310-12-166-7430

Flat Washer

5310121667430 121667430 D125-A105-R865 VS0824728 (241)D2280101661 101661 2.72-37968/1138 2.72-37959/1553 99140993 252260027153 318410 101278 DIN125-A10,5-140HV-A4 D125A105R865 06150190011 A10,5DIN125-A4 A10,5DIN125-A4-70 A10-5DIN125-1-4401 A10-5DIN125A4 A10-5DIN125X5CRNIM01810 DIN125-A10,5-A4-70

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer