5310-12-166-4349

Flat Washer

5310121664349 121664349 DIN9021-3,2-140HV-G3E D9021-B32-S1 D9021B32S1 25 207-001 25207-001 B3-2DIN9021STGALCU3NI5BK B3-2DIN9021STGALCU3NI5GL B3-2DIN9021STGALCUNI6BK DIN9021-B3,2-ST-G3E B3,2DIN9021-ST-G3E B3-2DIN9021STG3E B3-2DIN9021STG3I

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer