5310-12-163-0354

Flat Washer

5310121630354 121630354 16H944 TYPE 0461 NYLON 33672-001 5M.3212.220.66 99111636 5M3212-220-66 000125003217 0461 0030 000 DIN125-A3,2-PA A3-2DIN125P0LYAMIDA A3-2DIN125PA6 A3,2DIN125-PA 33 672-001 3-2DIN125P0LYAMID A3-2DIN125P0LYAMID A3.2DIN125-PA DIN125-A3,2-PA6.6 DIN125A3-2PA6 3-2DIN125PA 3-2DIN125POLYAM1DA 3-2DIN125POLYAMIDA A3-2DIN125PA

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer