5310-12-162-7817

Flat Washer

5310121627817 121627817 DIN433-5,3-140HV-A3P 24302170530 31878800 N 3502 216 5P VDPM00911 0203000 2916011011 5-3N5507 3.18788.00 6.373-025.0 000433005304 680S638P56 2916012011 602A593 06150300311 38250.050.001 N0115562 DIN433-5,3-A3P DIN433-5,3-ST-A3P 203000 6.373-025 5,3DIN433-ST-A3P 5-3DIN433STA3P 5-3DIN433STGALZN8C DIN433-5-3STA3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer