5310-12-159-1486

Flat Washer

5310121591486 121591486 24300750640 252260010147 N 3502 418 MN N3502418MN 273.876.011 DIN125-A6,4-CU2-E3P A6-4DIN125MSGALNI5MT DIN125-A6,4-CUZN-E3P 6-4DIN125MSGALNI5MT A6,4DIN125-MS-E3P A6-4DIN125MSE2A DIN125-A6,4-CU3-E3P DIN125-A6,4-MS-E3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer