5310-12-158-4185

Flat Washer

5310121584185 121584185 650255 5N.3212.001.01 0175308000 2101038084 2522 600 64152 DIN125-A8,4-NRST 5N3212-001-01 110286 8-4DIN125-1-4300 8-4DIN125NRST 8-4DIN125X12CRNI188 A8,4DIN125-NRST A8,4DIN125NRST A8-4DIN125-NRST A8-4DIN125NRST A8-4DIN125X12CRNI188 21010 37084 21010 38084 8-4DIN125NRST1000B47A2

Cancelled Without Replacement effective 1 Jan 2013

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer