5310-12-157-2968

Flat Washer

5310121572968 121572968 DIN988-S25X35 272.516054 273.516045 V221-27117 0009908440 SS25X35X2 0000014825 014825 PCH1184/P36/66-72832/1981 D160-05723REP172 94-0317 95115513 PCH1184/P36 914580 0057-410 0057410 S25X35DIN988

Cancelled Without Replacement effective 1 Jan 2013

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer