5310-12-156-4922

Flat Washer

5310121564922 121564922 D125-A43-S3 950 55 003 00 000125004311 24300110430 51-00122 1-3500-7019/31 IT1.31 01122121 908.04.002 1386289 991.4081 N040070012507000 0112 2121 6-1510-000474 N0115227 252260086026 407 04 7.312-001.0 6-261-0091 0114 0511 26050578 280011 DIN125-A4,3-140HV-A3P D125A43S3 7.312-001 A4,3DIN125-ST-A3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer