5310-12-154-2990

Flat Washer

5310121542990 121542990 DIN433-4,3-140HV-A4 00824586 0824586 99141020 2522 600 78025 043221004 VS0824586 10000366 A1Z10000366 D433A43R865 D433-A43-R865 252260078025 4-3DIN433A4 D433-A43-R60 4,3DIN433-A4-70 D433A43R60 DIN433-4.3-A4-70 4,3DIN433A4 DIN433-4,3-A4-70

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer