5310-12-152-4927
Flat Washer
5310121524927 121524927 370000-0068.862 043121010 DIN125-A4,3-1.4571 4,3DIN125-X10CRNIMOTI1810 4-3DIN125-1-4571 4-3DIN125X10CRNIM0TI1810 A4,3DIN125-1.4571 A4-3DIN125-1-4571 A4-3DIN125X10CRNIM0TI1810 A4-3DIN125X10CRNIMOTI1810
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-12-152-4927
Request a Quotation from participating marketplace vendors
Related Documents 5310-12-152-4927 5+ Documents (More...)
Restrictions 5310-12-152-4927
End Users 5310-12-152-4927
- Austria (WB)
- Brazil (YA)
- Spain (YB)
- Malaysia (YW)
- Belgium (ZB)
- Canada (ZC)
- Germany (ZG)
- Republic of Korea (ZH)
- Netherlands (ZN)
- Portugal (ZP)
- Greece (ZU)
- Turkey (ZW)
Approved Sources 5310-12-152-4927
- Part Number
- Manufacturer
- Status
- DIN125-A4,3-1.4571
- Manufacturer
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Inactive Standard
- Inactive Standard
- 370000-0068.862
- D0703 - Carl Zeiss Ag (Active)
- Secondary Buy
- Secondary Buy
- 043121010
- D1876 - Elac Sonar Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 4,3DIN125-X10CRNIMOTI1810
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4-3DIN125-1-4571
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4-3DIN125X10CRNIM0TI1810
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A4,3DIN125-1.4571
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A4-3DIN125-1-4571
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A4-3DIN125X10CRNIM0TI1810
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A4-3DIN125X10CRNIMOTI1810
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete