5310-12-152-0995

Flat Washer

5310121520995 121520995 DIN433-3,2-140HV-A2 E44080-M-851-A POS.30 26336-002 300.7602 273.325 183 E44080M851AP0S30 E44080M853BP0S6 0234.036-216 2522 600 83016 223194 450900-2043-032 3-2DIN433-A2 3,2DIN433-A2 3,2DIN433A2 DIN433-3,2-A2 DIN433-3,2-A2-70 DIN433-3-2A2 26 336-002 276196 3-2DIN433A2 3,2DIN433-A2-70 3-2DIN433-1-4301

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer