5310-12-149-4352

Flat Washer

5310121494352 121494352 311210215130 DIN125-A13-140HV-A3P DIN125-A13-140HVDBL845111 DIN125/13-ST N130130012507000 50093700 550612 893087 0010169 N 3501 055 5Q 0132248 60132248 N 000125 013008 2.72-31640 ITEM 1763 24300111300 590000125076 DIN 125/A13/ST/GAL 2 916 012 020 2916011020 000125013012 24300371300 0893087 6-261-0151 802.00/9014.66.6 26050365

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer