5310-12-145-4776

Flat Washer

5310121454776 121454776 1629567 6-262-0102 06151910210 1-3500-7019/31 IT4.15 6-1580-000496 N0116723 101268 DIN9021-A10,5-ST 7.312-285.0 009021010202 DIN9021-10,5-140HV-A3P 0399873 B10-5DIN9021STA3P B10-5DIN9021STGALZN8C B10-5DIN9021STZN8CX DIN9021-B10,5-ST-A3P DIN9021B10-5STA3P 009021010104 B10,5DIN9021-ST-A3P B10,5DIN9021-STGALZN8C

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer