5310-12-145-2243

Flat Washer

5310121452243 121452243 DIN7349-10,5-ST-A3P 007349010002 0709155 50070600 6152300206 6-265-0116 06.15230-0606 007349010003 06152300606 778128 938498 10-5DIN7349STGALZN8C 10-5DIN7349GALZN8C DIN7349-10-5STA3P 10,5DIN7349-ST-A3P 709155 6.15230-0206 10-5DIN7349STA3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer