5310-12-142-0645

Flat Washer

5310121420645 121420645 95.00.02.08 (241)A39630-118557 153-273 000125008406 N90033301 6-1510-000477 0017720000 1PA39630-118557 8500020800 7.312-004.0 603103083 1-4616-1150/02 IT16 0063704 6150106211 937899 91640323 95.00.42.08 ART NO 1-4616-128078 IT16 0711080 9903861 HIAB9903861 24300370840 0251905 990.3861 DIN125-B8,4-140HV-A3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer