5310-12-142-0640

Flat Washer

5310121420640 121420640 00119414 0017760000 ML70019 (241)A396300119414 2330A 099 100 (241)A39630-119414 991400060 937905 0010143 0-119414 DIN125-B17-140HV-A3P B17DIN125-ST-A3P B17DIN125-STGALZN8C 17MITFASEDIN125STGALZN8C DIN125B17STGALZN8C DIN125-B17-ST-A3P B17DIN125STA3P B17DIN125STGALZN8C DIN125B17STA3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer