5310-12-138-5427

Flat Washer

5310121385427 121385427 D125-A37-S1 D125A37S1 TFS00-09356 2101010037 DIN125-A3,7-140HV-G3E 3-7DIN125STG3I 3-7DIN125STGALCU3NI5GL A3,7DIN125-ST-G3E A3-7DIN125STG3E A3-7DIN125STGALCU3NI5BK DIN125-A3,7-ST-G3E 21010 10037

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer