5310-12-130-0561

Flat Washer

5310121300561 121300561 1202 8279 0000175552 2 430 100 582 0129 0473 01290473 2430100582 81.11308-0012 81113080012 VDPM00860 2430100035 EPMS5W20X 1290473 1290473EY8770-66 3-0215-00-8-0050 068130270 12028279 3.0215.00.8.0050 6-0690-72-5-2030

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer