5310-12-130-0560

Flat Washer

5310121300560 121300560 1202 8277 2430100577 0000175352 068130268 2 430 100 577 81.11308-0010 81113080010 VDPM00858 EPMS5W18X 3.0215.00.8.0048 1290471 01290471 12028277 2430100033 0129 0471 1290471EY8770-66 3-0215-00-8-0048 6-0690-72-5-2028

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer