5310-12-127-1469

Flat Washer

5310121271469 121271469 1202 8269 2430100557 0000174552 2 430 100 557 VDPM00851 068130260 51113080012 068130264B 51.11308-0012 EPMS5W10X 0129 0461 3-0215-00-8-0040 2430100023 3.0215.00.8.0040 1290461EY8770-66 01290461 1290461 12028269 6-0690-72-5-2021

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer