5310-12-126-6060

Flat Washer

5310121266060 121266060 DIN440-R6,6-100HV-A3P N011612.3 99154113 2659930 06150710102 000440006162 TW-6 207016 35001GS8 N0116123 080D94400B R6-6DIN440STA3P R6-6DIN440GALZN8C R6-6DIN440STGALZN8C R7DIN440VERZINKT DIN440-R6,6-ST-A3P DIN440R6-6STA3P R6,6DIN440-ST-A3P R6,6DIN440ST-A3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer