5310-12-126-4380
Flat Washer
5310121264380 121264380 65031953200 23-46
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
1
Marketplace 5310-12-126-4380
Request a Quotation from participating marketplace vendors
Related Documents 5310-12-126-4380 5+ Documents (More...)
Flat Washer 5310121264380 121264380 5310-12-126-4380 5310121264380 121264380 is a washer having
Flat Washer 5310121264380 121264380 5310-12-126-4380 5310121264380 121264380 is a washer having
Flat Washer 5310121264380 121264380 5310-12-126-4380 5310121264380 121264380 is a washer having
Flat Washer 5310121264380 121264380 Germany (DE) 4. 5310-12-126-4380 Marketplace Restrictions Approved
Management Open Request a Quotation from participating marketplace vendors Request Updated Every Day 5310-12-126-4380
Flat Washer 5310121264380 121264380 5310-12-126-4380 5310121264380 121264380 is a washer having
Restrictions 5310-12-126-4380
Approved Sources 5310-12-126-4380
- Part Number
- Manufacturer
- Status
- 65031953200
- Manufacturer
- D0103 - Andreas Stihl Ag & Co. Kg (Active)
- Primary Buy
- Primary Buy
- 23-46
- D0103 - Andreas Stihl Ag & Co. Kg (Active)
- Secondary Buy
- Secondary Buy