5310-12-125-0079

Flat Washer

5310121250079 121250079 DIN433-3,7-140HV-G3E D433-A37-S1 2101310037 D433A37S1 3,7DIN433-ST-G3E 3-7DIN433STG3E 3-7DIN433STG3I 3-7DIN433STGALCU3NI5BK 3-7DIN433STGALCU3NI5GL TFS00-09378 DIN433-3,7-ST-G3E 21013 10037

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer