Premium Information is available for this item - Upgrade for $1 a day
5310-12-124-0745
Flat Washer
5310121240745 121240745 DIN1440-20-ST DIN1440/20-ST 340 613 99 06.15120-0115 06151200115 1545-014 8409021 510811 150-0056 20DIN1440 20DIN1440-ST 20DIN1440ST DIN1440-20
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
1
Marketplace 5310-12-124-0745
Request a Quotation from participating marketplace vendors
Related Documents 5310-12-124-0745 5+ Documents (More...)
-ST-ZNPHR10F 20DIN1440PHRE 20DIN1440STZNPHR20F 20DIN1440STZNPHR8F 20DIN1440-ST-ZNPHR10F 20DIN1440PHRBB3
20DIN1440STZNPHR8F D8286 - Din Deutsches Institut Fuer Normung (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 20DIN1440
-ST-B2A 20DIN1440-ST-B2A 20DIN1440B2A 20DIN1440GALCD5MT 20DIN1440STB2A 20DIN1440STGALCD5MT A washer
ST-B2A D8286 - Din Deutsches Institut Fuer Normung (Active) Definitive Standard RNCC 2 RNVC 2 DAC 3 20DIN1440
-ST-A3P 1394110 20DIN1440-ST-A3P 20DIN1440GALZN6 20DIN1440GALZN8C 20DIN1440STGALZN5 20DIN1440STGALZN8C
RNVC 2 DAC 3 1394110 K6769 - Atlas Cranes Uk Limited (Active) Secondary Buy RNCC 5 RNVC 2 DAC 2 20DIN1440
Flat Washer 5310121240745 121240745 5310-12-124-0745 5310121240745 121240745 is a washer having
Flat Washer 5310121240745 121240745 5310-12-124-0745 5310121240745 121240745 is a washer having
Restrictions 5310-12-124-0745
End Users 5310-12-124-0745
- Austria (WB)
- Spain (YB)
- Singapore (YJ)
- Malaysia (YW)
- Australia (ZA)
- Belgium (ZB)
- Canada (ZC)
- Germany (ZG)
- United Kingdom (ZK)
- Italy (ZR)
- Norway (ZT)
- Greece (ZU)
- Turkey (ZW)
- United States of America (ZZ)
Approved Sources 5310-12-124-0745
- Part Number
- Manufacturer
- Status
- DIN1440-20-ST
- Manufacturer
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Definitive Standard
- Definitive Standard
- DIN1440/20-ST
- 0158B - Psa Peugeot-Citroen Espana, Sa (Active)
- Secondary Buy
- Secondary Buy
- 340 613 99
- D0207 - Demag Cranes & Components Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 06.15120-0115
- D3273 - Man Truck & Bus Se (Active)
- Secondary Buy
- Secondary Buy
- 06151200115
- D3273 - Man Truck & Bus Se (Active)
- Secondary Buy
- Secondary Buy
- 1545-014
- D8009 - Tadano Faun Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 8409021
- D8009 - Tadano Faun Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 510811
- D8150 - Meiller, F.X. Fahrzeug-Und (Active)
- Secondary Buy
- Secondary Buy
- 150-0056
- D0263 - Faun-Frisch Baumaschinen Gmbh (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 20DIN1440
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 20DIN1440-ST
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 20DIN1440ST
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- DIN1440-20
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Weapon Systems (WSDC) 5310-12-124-0745
DLA Procurement Analysis 5310-12-124-0745
- Last Stock Position:
- 385 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
NATO Stock Numbers Related to 5310-12-124-0745
Procurement History 5310-12-124-0745 1 Records
Contracting Technical Data File (CTDF) 5310-12-124-0745 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: