5310-12-124-0181

Flat Washer

5310121240181 121240181 3-5 0630302020 002166 000125017014 0114 4505 0056992 1500-027 1007338 12810 0630001020 083279 677324-550 50-6016 DIN125-A17-140HV 150-0009 150-009 17DIN125ST A17DIN125-ST A17DIN125ST DIN125-A17-ST F300 0T 017 9538

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer