Premium Information is available for this item - Upgrade for $1 a day

5310-12-123-1211

Flat Washer

5310121231211 121231211 0337 0359 0154-40-01-48 K0003370359 03370359 VDPM00384 571211077 0154-40-01.48 4035000 0108882 0795278 K0.00337-0359 0795-278 3370359 3370359EF0154-40

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

Managed by Germany

NSN Created on 30 May 1969

Data Last Changed
November 2023

NATO Update Count
1

NATO Data Quality

5310-12-123-1211 WASHER,FLAT 5310121231211 121231211 1/1 — NSN 5310-12-123-1211 (Generic Image) 1/1

Marketplace 5310-12-123-1211

Need Help?
Request a Quotation from participating marketplace vendors

Subscribe to View Vendor Details...

3370359 WASHER,FLAT 6 EA NS

Updated Every Day

5310-12-123-1211 RQST NE

Related Documents 5310-12-123-1211 5+ Documents (More...)

https//www.nsnlookup.com
/fsg-53/fsc-5310/de

5310-12-123-3266 Spring Tension Washer 5310121233266 121233266

Documents 5310-12-123-3266 5+ Documents (More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/de 5310-12-123-1211
Flat Washer 5310121231211 121231211,0337 0359 000108882 https//www.nsnlookup.com /fsg-53/fsc-5310

https//www.nsnlookup.com
/fsg-25/fsc-2510/de

2510-12-337-0359 Au Verbindungsteil 2510123370359 123370359

2510-12-337-0359 2510123370359 123370359 VERBINDUNGSTEIL, AU

https//www.nsnlookup.com
/fsg-14/fsc-1430/us

1430-01-079-5278 Guidance Unit Support Assembly 1430010795278

1430-01-079-5278 1430010795278 010795278 SUPPORT ASSEMBLY,GUIDANCE UNIT

https//www.nsnlookup.com
/fsg-16/fsc-1650/de

1650-12-010-8882 Pump Adjusting Sleeve 1650120108882 120108882

1650-12-010-8882 1650120108882 120108882 SLEEVE,ADJUSTING,PUMP

https//www.nsnlookup.com
/fsg-53/fsc-5305/us

5305-01-337-0359 Close Tolerance Screw 5305013370359 013370359

5305-01-337-0359 5305013370359 013370359 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.