Nuts and Washers - Belgium (BE)

Federal Supply Class (FSC): 5310

NATO Supply Classification Class (NSC): 5310

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Belgium (BE) - NCB is 13

Page 6 of 6

NSN Format for Nuts and Washers
Codified by Belgium

531013XXXXXXX
Group
FSG		ClassNCBIdentifier
FSC
Federal Supply Class		NIIN
NSN

NATO Supply Class 5310 is a classification within NATO Supply Group 53, which is dedicated to Hardware And Abrasives. Specifically, Class 5310 pertains to Nuts And Washers.

Nuts and washers are essential components in various mechanical and construction applications. They are used to secure and fasten different parts together, providing stability and preventing loosening or disassembly.

In the NATO supply system, Class 5310 includes a wide range of nuts and washers, such as:

1. Nuts: These are typically hexagonal or square-shaped metal fasteners with a threaded hole in the center. Nuts are used in conjunction with bolts or screws to create a secure joint. They come in various sizes, materials, and thread types to accommodate different applications.

2. Washers: Washers are flat, thin discs with a hole in the center. They are placed between the nut and the surface being fastened to distribute the load and prevent damage to the surface. Washers can also be used to provide insulation, reduce friction, or act as spacers.

NATO Supply Class 5310 ensures that the nuts and washers meet specific quality and performance standards required by NATO member countries. These standards may include factors such as material composition, strength, corrosion resistance, and dimensional specifications.

When procuring nuts and washers within NATO Supply Class 5310, it is important to consider the specific requirements of the application, such as the type of material being fastened, the load-bearing capacity needed, and any environmental factors that may affect the performance of the fasteners.

Overall, NATO Supply Class 5310 plays a crucial role in ensuring the availability of high-quality nuts and washers for military and defense-related applications within NATO member countries.

FSC 5310 Nuts and Washers - Belgium (BE)
FSC 5310 Nuts and Washers - Belgium (BE)

Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 5310 Frequently Asked Questions(FAQ) for Federal Supply Class 5310

What is Federal Supply Class 5310?
FSC 5310 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5310) in the USA for supply items codified in the category of Nuts and Washers.
What is NATO Supply Classification Class 5310?
NSC 5310 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5310 in the USA) for supply items codified in the category of Nuts and Washers.
Which Federal Supply Group is FSC 5310 in?
FSC 5310 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5310 in?
NSC 5310 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5310 Supply Items Included in Federal Supply Class 5310

What is a Hexagon Castellated Plain Nut? 10 Items
A Hexagon Castellated Plain Nut (NUT,PLAIN,CASTELLATED,HEXAGON) is a nut having 6 flat sides, flat on the bottom and having a slotted cylindrical or dome shaped upper portion. It is designed to provide positive locking when used with a solid or split (cotter) pin. Excludes NUT (1), PLAIN, SLOTTED, HEXAGON.
What is a Cap Plain Nut? 12 Items
A Cap Plain Nut (NUT,PLAIN,CAP) is an item internally threaded from one end, and completely inclosed on the opposite end. The outer periphery parallel to the threaded axis may be square, cylindrical, hexagonal, octagonal, or dodecagonal and taper to a cone or dome shape on the closed end. For like items which are stamped or formed from sheet stock, see NUT (1), STAMPED. For similar items which are flat on top and bottom see NUT (1), SLEEVE or POST, ELECTRICAL-MECHANICAL EQUIPMENT.
What is a Hexagon Plain Nut? 245 Items
A Hexagon Plain Nut (NUT,PLAIN,HEXAGON) is a nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
What is a Square Plain Nut? 11 Items
A Square Plain Nut (NUT,PLAIN,SQUARE) is a nut, flat on top and bottom, having 4 flat sides. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
What is a Hexagon Slotted Plain Nut? 17 Items
A Hexagon Slotted Plain Nut (NUT,PLAIN,SLOTTED,HEXAGON) is a nut having a flat bearing surface and 6 flat sides with slots in its upper portion. It is designed to provide positive locking when used with a solid or split (cotter) pin. Excludes NUT (1), PLAIN, CASTELLATED, HEXAGON.
What is a Wing Plain Nut? 30 Items
A Wing Plain Nut (NUT,PLAIN,WING) is a nut having wings designed for manual turning without driver or wrench.
What is a Key Washer? 101 Items
A Key Washer (WASHER,KEY) is a washer of nonresilient material usually having two parallel bearing surfaces. The outside and/or inside edges have one or more protuberances. The ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. The keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. Excludes thrust type washer.
What is a Blind Rivet Plain Nut? 166 Items
A Blind Rivet Plain Nut (NUT,PLAIN,BLIND RIVET) is a metallic headed fastener having internal threads for a portion of the full length. It may have a smooth, hexagon or splined shank with an open or closed end. Is designed to be expanded tightly against the material it is being installed in by means of a special tool. The item must have a specified grip range. The grip range is the thickness of the material the item is being installed in. See also NUT (1) SELF-LOCKING, BLIND RIVET. Excludes NUT (1), SLEEVE.
What is a Hexagon Extended Washer Plain Nut? 14 Items
A Hexagon Extended Washer Plain Nut (NUT,PLAIN,EXTENDED WASHER,HEXAGON) is a nut having 6 flat sides and an integral washer which extends beyond the flats or periphery.
What is a Hexagon Self-Locking Nut? 66 Items
A Hexagon Self-Locking Nut (NUT,SELF-LOCKING,HEXAGON) is a nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP.
What is a Keyway Washer? 11 Items
A Keyway Washer (WASHER,KEYWAY) is a washer of nonresilient material usually having two parallel bearing surfaces. The outside and/or inside edges have one or more notches. Excludes thrust type washers.
What is a Flat Washer? 560 Items
A Flat Washer (WASHER,FLAT) is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
What is a Lock Washer? 86 Items
A Lock Washer (WASHER,LOCK) is a washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
What is a Knurled Plain Nut? 21 Items
A Knurled Plain Nut (NUT,PLAIN,KNURLED) is a nut, round in shape, having all or part of its outer surface knurled. It may have provisions for external wrenching. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, ROUND. (When height or thickness, and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance).
What is a Round Plain Nut? 153 Items
A Round Plain Nut (NUT,PLAIN,ROUND) is a nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
What is a Barrel Self-Locking Nut? 20 Items
A Barrel Self-Locking Nut (NUT,SELF-LOCKING,BARREL) is a nut of cylindrical or partly cylindrical cross-section with integral threads perpendicular to the axial centerline. Ends may be flat or flanged. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, ROUND.
What is a Round Self-Locking Nut? 15 Items
A Round Self-Locking Nut (NUT,SELF-LOCKING,ROUND) is a nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. An integral feature is incorporated for locking on the threads of a mating member. Do not use if a more specific item name applies. Excludes COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; and TURNBUCKLE BODY.
What is a Recessed Washer? 20 Items
A Recessed Washer (WASHER,RECESSED) is a washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED.
What is a Shouldered Washer? 11 Items
A Shouldered Washer (WASHER,SHOULDERED) is a washer, round in shape, and having a centrally located hole. One bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
What is a Spring Tension Washer? 51 Items
A Spring Tension Washer (WASHER,SPRING TENSION) is a bent spring metal washer with a centrally located hole. It is designed to exert pressure axially when assembled in place.
What is a Barrel Plain Nut? 11 Items
A Barrel Plain Nut (NUT,PLAIN,BARREL) is a nut of cylindrical or partly cylindrical cross-section with integral threads perpendicular to the axial centerline. Ends may be flat or flanged. Excludes NUT (1), PLAIN, ROUND.
What is a Sleeve Nut? 33 Items
A Sleeve Nut (NUT,SLEEVE) is an internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY.
What is a Seal Washer? 18 Items
A Seal Washer (WASHER,SEAL) is a washer of various shapes having a centrally located hole. It is primarily used as a seat for a bolt or screw to distribute pressure and has a sealing element. It may be used in connection with metallic washers to which it can be bonded.

Stock Items From Supply Class 5310 Stock Items From Supply Class 5310 Page 6 of 6

NSN 5310-13-105-6695 131056695 NUT
5310-13-105-6695
Nut
131056695
4-1435
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-118-2246 131182246 WASHER,RECESSED
5310-13-118-2246
Recessed Washer
131182246
880022/19
RNCC: 3 | RNVC: 2
12 Jun 2001
NSN 5310-13-112-0673 131120673 NUT,CAP,SELF-LOCKIN
5310-13-112-0673
Self-Lockin Cap Nut
131120673
217M49
RNCC: 3 | RNVC: 2
18 Jan 1983
NSN 5310-13-113-4947 131134947 WASHER,KEY
5310-13-113-4947
Key Washer
131134947
SLW40.289-M12-P-L-SP1
RNCC: 3 | RNVC: 2
12 Oct 1988
NSN 5310-13-115-2859 131152859 WASHER,SEAL
5310-13-115-2859
Seal Washer
131152859
945897-7
RNCC: 3 | RNVC: 2
12 Apr 1995
NSN 5310-13-116-9905 131169905 NUT,SELF-LOCKING,HEXAGON
5310-13-116-9905
Hexagon Self-Locking Nut
131169905
ISO7040-M14-10-NF
RNCC: 2 | RNVC: 2
23 Sep 1998
NSN 5310-13-109-9956 131099956 WASHER,FLAT
5310-13-109-9956
Flat Washer
131099956
NO PRIMARY REF 13-109-9956
RNCC: 3 | RNVC: 2
PL431A3
RNCC: 5 | RNVC: 2
1 Apr 1975
NSN 5310-13-103-2204 131032204 WASHER,FLAT
5310-13-103-2204
Flat Washer
131032204
A10-57111130
RNCC: 3 | RNVC: 2
A10.57.111.13.0
RNCC: 5 | RNVC: 2
A10-57-111-13-0
RNCC: 5 | RNVC: 2
1 Apr 1975
NSN 5310-13-105-6815 131056815 NUT
5310-13-105-6815
Nut
131056815
4-188
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-114-4192 131144192 WASHER,SPLIT
5310-13-114-4192
Split Washer
131144192
65-048
RNCC: 3 | RNVC: 2
13 Apr 1993
NSN 5310-13-111-0590 131110590 NUT,SLEEVE
5310-13-111-0590
Sleeve Nut
131110590
150104-017
RNCC: 3 | RNVC: 2
1200002-150104-017
RNCC: 5 | RNVC: 9
6 Mar 1979
NSN 5310-13-111-4666 131114666 NUT,PLAIN,HEXAGON
5310-13-111-4666
Hexagon Plain Nut
131114666
2-780
RNCC: 3 | RNVC: 2
2-860
RNCC: 5 | RNVC: 2
3 Feb 1981
NSN 5310-13-103-2166 131032166 BRAKES
5310-13-103-2166
Brakes
131032166
A10-51000190
RNCC: 3 | RNVC: 2
A10-51-000-19-0
RNCC: 5 | RNVC: 2
1 Apr 1975
NSN 5310-13-118-9080 131189080 WASHER,FLAT
5310-13-118-9080
Flat Washer
131189080
ISO7093-2-8-100HV-A3P
RNCC: 2 | RNVC: 2
12 Jun 2004
NSN 5310-13-117-4795 131174795 NUT,PLAIN,CONE SEAT
5310-13-117-4795
Cone Seat Plain Nut
 
NSN 5310-13-117-8165 131178165 WASHER,FLAT:
5310-13-117-8165
Flat: Washer
 
NSN 5310-13-106-2599 131062599 RITZEL
5310-13-106-2599
Ritzel
131062599
E6117-13-02-02
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-116-4578 131164578 NUT,PLAIN,PLATE
5310-13-116-4578
Plate Plain Nut
131164578
8266 408-005
RNCC: 3 | RNVC: 2
18 Mar 1997
NSN 5310-13-001-6044 130016044 NUT,PLAIN,HEXAGON
5310-13-001-6044
Hexagon Plain Nut
130016044
220-66-02-43
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-120-9239 131209239 NUT,PLAIN,BLIND RIVET
5310-13-120-9239
Blind Rivet Plain Nut
131209239
524 700
RNCC: 3 | RNVC: 2
TU-SM4UPO30R
RNCC: 5 | RNVC: 2
24 894 040300
RNCC: 5 | RNVC: 2
20 Aug 2010
NSN 5310-13-112-2898 131122898 NUT,PLAIN,BLIND RIVET
5310-13-112-2898
Blind Rivet Plain Nut
131122898
TUBTARAMSM5TFP40
RNCC: 3 | RNVC: 2
1101073-10-3
RNCC: 6 | RNVC: 9
3 Jan 1984
NSN 5310-13-116-1168 131161168 NUT,SLEEVE
5310-13-116-1168
Sleeve Nut
131161168
NO PRIMARY REF 13-116-1168
RNCC: 3 | RNVC: 2
A9990006
RNCC: 5 | RNVC: 9
3 Jul 1996
NSN 5310-13-114-1371 131141371 WASHER,KEY
5310-13-114-1371
Key Washer
131141371
SLW 40.710-M24
RNCC: 3 | RNVC: 2
29 Apr 1992
NSN 5310-13-118-5075 131185075 NUT,PLAIN,HEXAGON
5310-13-118-5075
Hexagon Plain Nut
131185075
ISO4032-M30-8-A3C
RNCC: 2 | RNVC: 2
9 Oct 2002
NSN 5310-13-103-8728 131038728 NUT,PLAIN,ROUND
5310-13-103-8728
Round Plain Nut
131038728
SC13-2950-1-7-3
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-116-2093 131162093 WASHER,SPRING,REGUL
5310-13-116-2093
Regul Spring Washer
131162093
3527540013
RNCC: 3 | RNVC: 2
25 Sep 1996
NSN 5310-13-119-1473 131191473 WASHER,FLAT
5310-13-119-1473
Flat Washer
131191473
ISO7093-1-4-200HV-A3C
RNCC: 2 | RNVC: 2
8669022
RNCC: 5 | RNVC: 2
2 Jun 2005
NSN 5310-13-108-4793 131084793 WASHER,KEY
5310-13-108-4793
Key Washer
131084793
4063320173
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-120-4696 131204696 WASHER,LOCK
5310-13-120-4696
Lock Washer
131204696
7284.10.440
RNCC: 3 | RNVC: 2
5 Nov 2008
NSN 5310-13-121-6342 131216342 WASHER,FLAT
5310-13-121-6342
Flat Washer
131216342
M575T443620000
RNCC: 3 | RNVC: 2
11 Jul 2013
NSN 5310-13-109-3646 131093646 WASHER,FLAT
5310-13-109-3646
Flat Washer
131093646
057-50-015
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-121-3884 131213884 WASHER,FLAT
5310-13-121-3884
Flat Washer
131213884
M575T4955200000
RNCC: 3 | RNVC: 2
12 Jun 2012
NSN 5310-13-120-7727 131207727 NUT,SELF-LOCKING,HEXAGON
5310-13-120-7727
Hexagon Self-Locking Nut
131207727
ISO7042-M12-6-A2P
RNCC: 3 | RNVC: 2
BOVIEC0656
RNCC: 5 | RNVC: 2
22 Feb 2010
NSN 5310-13-117-5882 131175882 NUT,PLAIN,HEXAGON
5310-13-117-5882
Hexagon Plain Nut
131175882
NMG301-3/4"-10UNC
RNCC: 3 | RNVC: 2
11 Feb 2000
NSN 5310-13-118-8484 131188484 NUT,PLAIN,HEXAGON
5310-13-118-8484
Hexagon Plain Nut
131188484
ISO4032-M14-A2-70
RNCC: 2 | RNVC: 2
25 Mar 2004
NSN 5310-13-121-2381 131212381 WASHER,FLAT
5310-13-121-2381
Flat Washer
131212381
0514807
RNCC: 3 | RNVC: 2
6 Oct 2011
NSN 5310-13-115-1057 131151057 NUT,SELF-LOCKING,BARREL
5310-13-115-1057
Barrel Self-Locking Nut
131151057
SL405M18A
RNCC: 3 | RNVC: 2
3 Jan 1995
NSN 5310-13-118-4616 131184616 NUT,PLAIN,HEXAGON
5310-13-118-4616
Hexagon Plain Nut
131184616
ISO4032-16TPI-UNF-3/4INCH
RNCC: 3 | RNVC: 2
30 Jul 2002
NSN 5310-13-116-9914 131169914 NUT,SELF-LOCKING,HEXAGON
5310-13-116-9914
Hexagon Self-Locking Nut
131169914
ISO7040-M24-8-NF-A2P
RNCC: 2 | RNVC: 2
23 Sep 1998
NSN 5310-13-118-2407 131182407 WASHER,FLAT
5310-13-118-2407
Flat Washer
131182407
ISO 7093-1-8-200 HV-A4
RNCC: 3 | RNVC: 2
20 Jun 2001
NSN 5310-13-112-9145 131129145 NUT,PLAIN,ROUND
5310-13-112-9145
Round Plain Nut
131129145
SLN40252M55X2C-LH
RNCC: 3 | RNVC: 2
22 Oct 1986
NSN 5310-13-113-3164 131133164 WASHER,LOCK
5310-13-113-3164
Lock Washer
131133164
101097-00
RNCC: 3 | RNVC: 2
27 Apr 1988
NSN 5310-13-119-1750 131191750 NUT,SELF-LOCKING,HEXAGON
5310-13-119-1750
Hexagon Self-Locking Nut
131191750
ISO7040-M8-8-A3C
RNCC: 2 | RNVC: 2
27 Jul 2005
NSN 5310-13-118-2451 131182451 NUT,PLAIN,ROUND
5310-13-118-2451
Round Plain Nut
131182451
SL61NM3510FSP
RNCC: 3 | RNVC: 2
SL61NM035-10-FSP
RNCC: 6 | RNVC: 9
SL61NM35F-SP
RNCC: 6 | RNVC: 9
SL61NM35X1FSP
RNCC: 6 | RNVC: 9
28 Jun 2001
NSN 5310-13-115-7078 131157078 WASHER,LOCK
5310-13-115-7078
Lock Washer
131157078
Z097-00-00062
RNCC: 3 | RNVC: 2
19 Dec 1995
NSN 5310-13-103-1944 131031944 NUT,PLAIN,SLOTTED,HEXAGON
5310-13-103-1944
Hexagon Slotted Plain Nut
131031944
A10-56-350-15-0
RNCC: 3 | RNVC: 2
A10-56-350-15-0
RNCC: 5 | RNVC: 2
1 Apr 1975
NSN 5310-13-117-2347 131172347 WASHER
5310-13-117-2347
Washer
131172347
620.040.1114.01
RNCC: 3 | RNVC: 2
6 Mar 1999
NSN 5310-13-116-9860 131169860 WASHER,FLAT
5310-13-116-9860
Flat Washer
131169860
6853 444-080
RNCC: 3 | RNVC: 2
23 Sep 1998
NSN 5310-13-111-4665 131114665 WASHER,LOCK
5310-13-111-4665
Lock Washer
131114665
2-700
RNCC: 3 | RNVC: 2
3 Feb 1981
NSN 5310-13-116-9865 131169865 WASHER,SPRING TENSION
5310-13-116-9865
Spring Tension Washer
131169865
6120 710-003
RNCC: 3 | RNVC: 2
23 Sep 1998
NSN 5310-13-115-7136 131157136 NUT,SELF-LOCKING,ROUND
5310-13-115-7136
Round Self-Locking Nut
131157136
SL40742-19RH
RNCC: 3 | RNVC: 2
3 Jan 1996
NSN 5310-13-109-7645 131097645 WASHER,FLAT
5310-13-109-7645
Flat Washer
131097645
4GI029298
RNCC: 3 | RNVC: 9
4GI29298
RNCC: 5 | RNVC: 2
1 Apr 1975
NSN 5310-13-117-0244 131170244 NUT,PLAIN,HEXAGON
5310-13-117-0244
Hexagon Plain Nut
131170244
943927-4
RNCC: 3 | RNVC: 2
4 Nov 1998
NSN 5310-13-113-5875 131135875 NUT,SLEEVE
5310-13-113-5875
Sleeve Nut
131135875
30465
RNCC: 3 | RNVC: 2
30465/B1421
RNCC: 5 | RNVC: 2
9 May 1989
NSN 5310-13-121-0332 131210332 NUT SPACER,PLATE
5310-13-121-0332
Plate Nut Spacer
131210332
B0142100313
RNCC: 3 | RNVC: 2
25 Oct 2010
NSN 5310-13-113-8139 131138139 DISK INTERRUPTOR LA
5310-13-113-8139
Disk Interruptor La
131138139
A19/13
RNCC: 3 | RNVC: 2
14 Aug 1990
NSN 5310-13-101-0023 131010023 NUT,PLAIN,WING
5310-13-101-0023
Wing Plain Nut
131010023
B203-1650331
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-103-2163 131032163 NUT,PLAIN,HEXAGON
5310-13-103-2163
Hexagon Plain Nut
131032163
A10-51000150
RNCC: 3 | RNVC: 2
A10-51-000-15-0
RNCC: 5 | RNVC: 2
31 Mar 1977
NSN 5310-13-117-0400 131170400 NUT,SELF-LOCKING,HEXAGON
5310-13-117-0400
Hexagon Self-Locking Nut
131170400
3005299156
RNCC: 3 | RNVC: 2
20 Nov 1998
NSN 5310-13-112-8732 131128732 WASHER,RECESSED
5310-13-112-8732
Recessed Washer
131128732
MDG-1187
RNCC: 3 | RNVC: 2
2863/2
RNCC: 5 | RNVC: 2
F300 0T 001 2434
RNCC: 6 | RNVC: 9
15 Jul 1986
NSN 5310-13-116-5866 131165866 WASHER,LOCK
5310-13-116-5866
Lock Washer
131165866
LU-17 33 00-E
RNCC: 3 | RNVC: 2
LU-17 33 00-E
RNCC: 5 | RNVC: 2
LU17-33-00E
RNCC: 5 | RNVC: 2
9 Jul 1997
NSN 5310-13-118-0795 131180795 NUT,PLAIN,HEXAGON
5310-13-118-0795
Hexagon Plain Nut
131180795
01.121.116
RNCC: 3 | RNVC: 2
21 Dec 2000
NSN 5310-13-112-2862 131122862 NUT,PLAIN,BLIND RIVET
5310-13-112-2862
Blind Rivet Plain Nut
131122862
TUBTARAMSM4TFP25
RNCC: 3 | RNVC: 2
1101073-05-3
RNCC: 6 | RNVC: 9
20 Dec 1983
NSN 5310-13-001-6037 130016037 NUT,PLAIN,ROUND
5310-13-001-6037
Round Plain Nut
130016037
220-16-02-08
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-113-8511 131138511 WASHER,KEY
5310-13-113-8511
Key Washer
131138511
SLN40580M10X1-5C
RNCC: 3 | RNVC: 2
28 Aug 1990
NSN 5310-13-113-5127 131135127 NUT,PLAIN,SQUARE
5310-13-113-5127
Square Plain Nut
131135127
1120129
RNCC: 3 | RNVC: 2
23 Nov 1988
NSN 5310-13-118-9233 131189233 WASHER,FLAT
5310-13-118-9233
Flat Washer
131189233
ISO7089-3-140HV-A3P
RNCC: 2 | RNVC: 2
25 Jun 2004
NSN 5310-13-001-5511 130015511 WASHER,KEY:
5310-13-001-5511
Key: Washer
 
NSN 5310-13-118-9234 131189234 WASHER,FLAT
5310-13-118-9234
Flat Washer
131189234
ISO7089-8-200HV-MS
RNCC: 2 | RNVC: 2
25 Jun 2004
NSN 5310-13-101-4002 131014002 WASHER,LOCK
5310-13-101-4002
Lock Washer
131014002
SCA13-1203
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-010-0594 130100594 NUT,SELF-LOCKING,ROUND
5310-13-010-0594
Round Self-Locking Nut
130100594
3602010760
RNCC: 3 | RNVC: 2
3602000742
RNCC: 5 | RNVC: 2
MA15G
RNCC: 5 | RNVC: 2
31 Mar 1977
NSN 5310-13-001-6143 130016143 NUT,PLAIN,HEXAGON
5310-13-001-6143
Hexagon Plain Nut
130016143
5L32357
RNCC: 3 | RNVC: 2
1 Apr 1975
NSN 5310-13-111-9362 131119362 NUT,PLAIN,ROUND
5310-13-111-9362
Round Plain Nut
131119362
SK41BE018100LE
RNCC: 3 | RNVC: 2
25 May 1982
NSN 5310-13-121-6135 131216135 WASHER,SEAL
5310-13-121-6135
Seal Washer
131216135
DD-SW-77/87-S
RNCC: 3 | RNVC: 2
00207313
RNCC: 5 | RNVC: 2
13 Jun 2013
NSN 5310-13-103-1963 131031963 WASHER,FLAT
5310-13-103-1963
Flat Washer
131031963
A10-11-401-10-0
RNCC: 3 | RNVC: 2
A10-11-401-10-0
RNCC: 5 | RNVC: 2
SFA165AD30-10L9
RNCC: 5 | RNVC: 2
1 Apr 1975
NSN 5310-13-113-8862 131138862 WASHER,FLAT
5310-13-113-8862
Flat Washer
131138862
1114012
RNCC: 3 | RNVC: 2
23 Oct 1990
NSN 5310-13-119-1941 131191941 WASHER,FLAT
5310-13-119-1941
Flat Washer
131191941
ISO7093-1-5-200HV-A3C
RNCC: 2 | RNVC: 2
29 Sep 2005