5310-66-128-5631
Flat Washer
5310661285631 661285631 8941725900 8942569790 675/2/43173/000
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-66-128-5631
Request a Quotation from participating marketplace vendors
Related Documents 5310-66-128-5631 2+ Documents (More...)
Restrictions 5310-66-128-5631
End Users 5310-66-128-5631
- Australia (ZA)
Approved Sources 5310-66-128-5631
- Part Number
- Manufacturer
- Status
- 8941725900
- Manufacturer
- S0226 - Isuzu Motor Co. Ltd (Replaced)
- Primary Buy
- Primary Buy
- 8941725900
- Z5394 - Jaguar Land Rover Australia Pty Ltd (Active)
- Primary Buy
- Primary Buy
- 8942569790
- S0226 - Isuzu Motor Co. Ltd (Replaced)
- Secondary Buy
- Secondary Buy
- 675/2/43173/000
- Z4986 - Bae Systems Australia Pty Ltd (Active)
- Secondary Buy
- Secondary Buy
- 8942569790
- Z5394 - Jaguar Land Rover Australia Pty Ltd (Active)
- Secondary Buy
- Secondary Buy