5310-66-014-2897
Flat Washer
5310660142897 660142897 BS 3410 038-008
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-66-014-2897
Request a Quotation from participating marketplace vendors
Related Documents 5310-66-014-2897 5+ Documents (More...)
350-0853 United Kingdom (ZK) Approved Sources 6685-12-350-0853 Part NumberManufacturerStatus360.081/038/008
AMC 3 AMSC H IMC Z IMCACTY KE Approved Sources 5935-01-441-8645 Part NumberManufacturerStatus429-038-008
59211 - Parker-Hannifin Corporation (Active) Primary Buy RNCC 3 RNVC 2 DAC A 429-038-008 26055 -
AMC 3 AMSC P IMC Z IMCACTY KE Approved Sources 6680-01-313-1865 Part NumberManufacturerStatus028-038-008
26055 - Parker-Hannifin Corp (Active) Primary Buy RNCC 3 RNVC 2 MEDALS DAC 5 028-038-008 59211 -
Restrictions 5310-66-014-2897
End Users 5310-66-014-2897
- Oman (VE)
- Malaysia (YW)
- Australia (ZA)
- New Zealand (ZE)
Approved Sources 5310-66-014-2897
- Part Number
- Manufacturer
- Status
- BS 3410
- Manufacturer
- K7766 - Bsi Standards Limited (Active)
- Incomplete Reference
- Incomplete Reference
- 038-008
- Z1272 - Adi Ltd Ordnance Divisionalbury (Active)
- Secondary Buy
- Secondary Buy