Premium Information is available for this item - Upgrade for $1 a day
5307-01-623-2180
Self-Locking Stud
5307016232180 016232180 M63540/1-53C
A headed fastener threaded externally on a portion or on the full length of the shank. The head has projections on the underside or periphery, or is otherwise designed to be mechanically pressed and embedded in a metallic panel, or the like. It is securely locked in position by the displaced metal. For items that require locking rings, see BOLT, SELF-LOCKING and STUD, LOCKED IN. Excludes INSERT, SCREW THREAD. View more Self-Locking Stud
May 2023
2
Marketplace 5307-01-623-2180
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-623-2180 1+ Documents (More...)
United States (US) 4. 5307-01-623-2180 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5307-01-623-2180 RQST NE Updated Every Day 5307-01-623-2180 RQST
Restrictions 5307-01-623-2180
5307-01-623-2180 is a Self-Locking Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-623-2180
- US Army (A919)
- Effective Date:
- 1 Nov 2013
- Supplementary Receivers:
- BF
Approved Sources 5307-01-623-2180
- Part Number
- Manufacturer
- Status
- M63540/1-53C
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-01-623-2180
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- End Item Identification [AGAV]
- 2350-01-305-0028
- Hardness Rating [CQFM]
- 171.0 Brinell Standard Minimum
- Head Diameter [AASL]
- 0.361 Inches Minimum And 0.391 Inches Maximum
- Head Length [AASV]
- 0.150 Inches Maximum
- Material [MATT]
- Steel Corrosion Resisting Or Steel Comp 303 Or Steel Comp 303Se
- Nominal Thread Size [CQJX]
- 0.313 Inches Nut Thread
- Locking Feature [AAUM]
- Self-Clinching Head
- Material Document And Classification [MDCL]
- Astm A493 Assn Std 1St Material Response Or Astm A582/A582m Assn Std 2Nd Material Response Or Astm A582/A582m Assn Std 3Rd Material Response
- Overall Length [ABHP]
- 0.860 Inches Minimum And 0.890 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Stud,Self-Locking,Flush Head,Ribbed Clinch Type
- Thread Quantity Per Inch [CMLP]
- 18 Nut Thread
- Thread Series Designator [THSD]
- Unc Nut Thread
- Specification/Standard Data [ZZZK]
- 80205-Nas-63540/1 Professional/Industrial Association Standard
- Style Designator [STYL]
- Self-Locking
- Surface Treatment Document And Classification [STDC]
- Cleaned,Descaled And Passivated Iaw Astm A380 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Length [AASA]
- 0.725 Inches Nominal Nut Thread
DLA Procurement Analysis 5307-01-623-2180
Management Data 5307-01-623-2180
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5307-01-623-2180
Freight Information 5307-01-623-2180
5307-01-623-2180 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-623-2180 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-623-2180 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-623-2180 is not classified as a special type of cargo when transported by water. 5307-01-623-2180 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-01-623-2180 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: