Premium Information is available for this item - Upgrade for $1 a day
5307-01-617-1217
Plain Stud
5307016171217 016171217 3-40536-8 3-40536
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
November 2023
1
Marketplace 5307-01-617-1217
Request a Quotation from participating marketplace vendors
Restrictions 5307-01-617-1217
5307-01-617-1217 is a Plain Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-617-1217
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2013
Approved Sources 5307-01-617-1217
- Part Number
- Manufacturer
- Status
- 3-40536-8
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 3-40536
- 81205 - The Boeing Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5307-01-617-1217
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- End Item Identification [AGAV]
- B-52 Aircraft
- Material Document And Classification [MDCL]
- Mil-S-6050 Mil Spec 1St Material Response Or Mil-S-6758 Mil Spec 2Nd Material Response
- Material [MATT]
- Steel Comp 8630 Or Steel Comp 4130
- Nominal Thread Size [CQJX]
- 0.1900 Inches Nut Thread A
- Nominal Thread Size [CQJX]
- 0.1900 Inches Nut Thread B
- Overall Length [ABHP]
- 9.36 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Tie-Rod "Q" Spring
- Special Features [FEAT]
- All Surfaces If Machined From Bar Stock To Be 250 Microinches
- Thread Series Designator [THSD]
- Unf Nut Thread A
- Thread Series Designator [THSD]
- Unf Nut Thread B
- Thread Quantity Per Inch [CMLP]
- 32 Nut Thread A
- Thread Quantity Per Inch [CMLP]
- 32 Nut Thread B
- Surface Treatment Document And Classification [STDC]
- Finish Per Bac Spec F-130 No Primer On Threads Mfr Ref Single Treatment Response Body
- Thread Class [AAJD]
- 3A Nut Thread A
- Thread Class [AAJD]
- 3A Nut Thread B
- Thread Direction [AAJF]
- Right-Hand Nut Thread A
- Thread Direction [AAJF]
- Right-Hand Nut Thread B
- Thread Length [AASA]
- 0.540 Inches Nominal Nut Thread A
- Thread Length [AASA]
- 0.540 Inches Nominal Nut Thread B
Weapon Systems (WSDC) 5307-01-617-1217
DLA Procurement Analysis 5307-01-617-1217
- Last Stock Position:
- 33 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-617-1217
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Dec 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Jan 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-01-617-1217
Freight Information 5307-01-617-1217
5307-01-617-1217 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-617-1217 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-617-1217 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-617-1217 is not classified as a special type of cargo when transported by water. 5307-01-617-1217 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5307-01-617-1217 4 Records
Contracting Technical Data File (CTDF) 5307-01-617-1217 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: