Premium Information is available for this item - Upgrade for $1 a day
5307-01-595-5572
Shouldered Stud
5307015955572 015955572 MS9303-002
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
November 2023
5
Marketplace 5307-01-595-5572
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-595-5572 3+ Documents (More...)
United States (US) 4. 5307-01-595-5572 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5307-01-595-5572 RQST NE Updated Every Day 5307-01-595-5572 RQST
Documents 4470-00-595-5572 2+ Documents ( More https//www.nsnlookup.com /fsg-53/fsc-5307/us 5307-01-595-5572
Shouldered Stud 5307015955572 015955572 BUY NE FedMall Updated Every Day 5307-01-595-5572 RQST
Restrictions 5307-01-595-5572
5307-01-595-5572 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-595-5572
- US Air Force (FUGX)
- Effective Date:
- 1 May 2011
Approved Sources 5307-01-595-5572
- Part Number
- Manufacturer
- Status
- MS9303-002
- Manufacturer
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- MS9303-002
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Original Design
- Original Design
- MS9303-002
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-595-5572
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 0.367 Inches Minimum And 0.376 Inches Maximum
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.190 Inches Stud Thread
- Nominal Thread Size [CQJX]
- 0.191 Inches Nut Thread
- Nut End Shank Diameter [CTDT]
- 0.190 Inches Nominal
- Nut End Shank Length [ADDB]
- 0.365 Inches Minimum And 0.385 Inches Maximum
- Shoulder Length [AAVK]
- 0.385 Inches Maximum
- Overall Length [ABHP]
- 0.938 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Stud,Shouldered,Hexagon Wrenching
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
- Thread Quantity Per Inch [CMLP]
- 32 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 32 Stud Thread
- Style Designator [STYL]
- Shouldered
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.375 Inches Nominal Nut Thread
- Thread Length [AASA]
- 0.438 Inches Nominal Stud Thread
Weapon Systems (WSDC) 5307-01-595-5572
DLA Procurement Analysis 5307-01-595-5572
- Last Stock Position:
- 19 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-595-5572
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-01-595-5572
Freight Information 5307-01-595-5572
5307-01-595-5572 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-595-5572 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-595-5572 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-595-5572 is not classified as a special type of cargo when transported by water. 5307-01-595-5572 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-01-595-5572 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: